Looking for:
Ms-ra55 manual |
Ms-ra55 manual
Press and hold to turn off the stereo. Select to mute and un-mute the stereo. BT source: Select to skip to the previous track. BT source: Select to pause or resume. Using the Dial to Select Items You can use the dial to highlight and select items on the screen.
Adjusting the Volume 1 Use the dial to adjust the volume. TIP: To control all zones at the same time, press the dial until all zones are highlighted.
Entering Text You can enter text to change some settings values on this device, such as changing the name of the device. Stereo Screen The information displayed on the stereo screen varies depending on the source selected. These devices have either RCA connectors, a line output, or a headphone output jack. Bluetooth Device Playback You can control the playback using the stereo, but you cannot browse the music collection. You should select a song or playlist on the media device.
The availability of song information, such as song title, artist name, and track duration, depends on the capability of the media player and music application. The shuffle and repeat status icons are not supported over Bluetooth wireless technology.
Connecting a Compatible Bluetooth Device You can play media from a compatible Bluetooth device using the Bluetooth wireless connection. When pairing, your compatible Bluetooth device may ask you to confirm a code on the stereo. The stereo does not display a code, but it does connect correctly when you confirm the message on the Bluetooth device. Getting Started 1. Page: 4 8 If your compatible Bluetooth device does not immediately connect to the stereo, repeat steps 1 through 7.
Bluetooth Range Information The stereo and Bluetooth wireless devices have a range of 10 m 33 ft. For optimal performance, the Bluetooth wireless device should also have a clear line of sight to the stereo. This setting turns off automatically after two minutes to prevent possible interruption to audio after pairing a Bluetooth device to the stereo.
Saving a Station as a Preset 1 With an applicable source selected, tune the stereo to a station. TIP: You can quickly save the selected station as a preset by holding. Selecting a Preset from a List Before you can select a preset from a list, you must save at least one station as a preset. NOTE: When an option button is filled, the option is on. When the option button is clear, the option is off. ZONE: Enables you to set the balance, volume limit, and names of the speaker zones. Cleaning the Device 1 Dampen a soft, clean, lint-free cloth with fresh water.
Bluetooth technology performs best with line-of-sight operation. The stereo does not display all song information from my Bluetooth source The availability of song information, such as song title, artist name, and track duration, depends on the capability of the media player and music application. Album cover artwork and shuffle and repeat status icons are not supported by this stereo on Bluetooth technology.
Reducing Unexpected Noise If the stereo is subject to strong electrical interference, this interference might be heard through the speakers. You should take appropriate action to suppress or reduce the noise.
Specifications General Weight g Appendix 3. See the Important Safety and Product Information guide in the product box for product warnings and other important information. This device must be installed according to these instructions. Disconnect the vessel's power supply before beginning to install this product.
Before applying power to this product, make sure it has been correctly grounded, following the instructions in the guide. You must read all installation instructions before beginning the installation. There is only a small amount of clearance between the case and the mounting holes, and cutting the hole too large could compromise the stability of the stereo after it is mounted.
Be careful when installing the stereo in an aluminum boat or a boat with a conductive hull, if you require the electrical system to be isolated from the boat hull. Before you can mount the stereo in a new location on the mounting surface, you must select a location in accordance with the mounting considerations. Page: 8 Connections The stereo must be connected to power, to speakers, and to media input sources to function correctly.
You should carefully plan the layout of the stereo, speakers, and your input sources before making any connections. If you are installing the stereo on a boat with a metal hull, you must use a ground-dependent antenna, and if you are installing the stereo on a boat with a non-metal hull, you must use a ground-independent antenna.
See the installation instructions provided with your antenna for more information. Ground - Black Connects to the negative terminal of a 12 Vdc power source. This wire should be connected before connecting the yellow wire. Please enter your email address. Fusion MS-RA Do you have a question about this product? Post your question here in this forum. Report abuse Libble takes abuse of its services very seriously.
Hateful or violent content For example, Anti-Semitic content, racist content, or material that could result in a violent physical act. Personal or private information For example, a credit card number, a personal identification number, or an unlisted home address. Promotion of regulated goods and services. Forumrules To achieve meaningful questions, we apply the following rules: First, read the manual; Check if your question has been asked previously; Try to ask your question as clearly as possible; Did you already try to solve the problem?
Therefore, avoid filling in personal details.
❿
No comments:
Post a Comment